WL80 Axle

The power axle is a mechanism placed at the stop of the pressure instruct that modifications the velocity and torque from the transmission and transmits them to the power wheels. The power axle is normally composed of the predominant reducer, differential, wheel pressure machine and pressure axle shell, etc., and the guidance power axle additionally has a regular pace ordinary joint. In addition, the pressure axle need to additionally face up to vertical, longitudinal and lateral forces, as nicely as braking torque and response forces appearing between the street floor and the body or body.
The pressure axle is at the give up of the strength transmission system, and its fundamental features are: (1) transmitting the engine torque from the typical transmission machine to the power wheel thru the foremost reducer, differential, half of shaft, etc., to minimize pace and expand torque; (2) Change the transmission route of torque thru the bevel equipment pair of the most important reducer; (3) The differential realizes the differential of the wheels on each aspects to make sure that the internal and outer wheels steer at specific speeds; (4) The bearing and torque transmission features are realized thru the bridge shell and wheels.

The force axle format must meet the following fundamental requirements:
1. The fundamental discount ratio chosen need to make certain that the vehicle has the nice energy and gasoline economy.
2. The usual dimension must be small, and the fundamental floor clearance have to be ensured. It by and large refers to the dimension of the most important reducer as small as possible.
3. Gears and different transmission components work easily and have low noise.
4. High transmission effectivity beneath a range of speeds and loads.
5. Under the situation of making sure enough electricity and stiffness, the mass have to be small, specially the unsprung mass have to be as small as feasible to enhance the smoothness of the car.
6. Coordinate with the motion of the suspension information mechanism, and for the steerage axle, it ought to additionally coordinate with the motion of the steerage mechanism.
7. Simple structure, exact processing technology, handy manufacturing, convenient to disassemble and adjust.

rated load  4000kg

Final drive ratio  6.167(37/6)

Maximum output torque  11200N.m

Braking method  Air brake

Brake specifications  φ320×95

Brake pressure  0.6~0.8Mpa

Weight  340Kg