Español
Русский
Türk
Português
العربية
Francés
हिंदीName
پرسیا
Mongolian
Hammer crusher
The hammer crusher is composed of a chassis, rotor, hammer head, bracket, liner, etc.The motor drives the rotor to rotate at high speed in the crushing chamber, and the material is fed into the machine from the upper feeding port, and it is broken by the impact, impact, and grinding of the high-speed hammer. After the traditional broken hammer crusher is broken, the material smaller than the gap in the grate is discharged through the grate. Our company adopts the method of adjustable counterattack liner to discharge the material, avoiding the problem of large powder production due to irregular and repeated strikes of the material; one person can adjust the particle size of the discharge material with a wrench, eliminating the tedious task of updating the grate; large pieces of material are actively avoided to avoid rotor damage or material blocking, and at the same time, additional counterattacks are added. Function, the discharge particle type is more perfect.
Snail case, strong and non-blocking material
Snail shell design, patented exterior design, with ribs on the back, strong impact force on the inside and outside, the inner fixing and outer tensioning of the chassis liner, never loose.The streamlined design, the chassis is fully adapted to the trajectory of the rotor, and the adjustable movable liner perfectly solves the problem of easy material blocking of traditional hammer crushers.
Perfect grain type
Through the unique designs of the three main strike zones, the artesian flow of the finished material, the adjustable trans liner, etc., the finished material level is finally reached, the powder production is low, and the particle size is comparable to that of natural sand.
Easy to maintain
Eight-way hammer shaft holes, four-way spare, the body is equipped with an observation door to facilitate observation of operation, and is equipped with a hydraulic shaft extractor to facilitate the replacement of the hammer head and hammer shaft. The wear-resistant parts are all bolted and fastened, which is easy to disassemble and reduces maintenance time and cost.
| Specification parameters | For stone | Feed side length (mm) | Pass amount | Rotation speed (r/min) | Electric power (kw) | |
| <30mm (t/h) | <70mm (t/h) | |||||
| LBC1616 | ＜180MPa | ≤700 | 280 | 400 | 420 | 220 |
| LBC1818 | ＜180MPa | ≤700 | 380 | 530 | 420 | 250 |
| LBC2018 | ＜180MPa | ≤700 | 500 | 700 | 350 | 355 |
| LBC2022 | ＜180MPa | ≤1000 | 600 | 860 | 350 | 500 |
| LBC2522 | ＜180MPa | ≤1100 | 1500 | 2100 | 300 | 900 |
