< >

SI series round vibrating screen

The SI series multi-layer circular vibrating screen is installed at an angle of 15-20°, and the vibration trajectory is circular.Under the action of gravity, the tilt angle is more conducive to the movement of materials, thereby improving production efficiency.It can be equipped with single-axis or double-axis, and the spring base is equipped with 4 limit damping.

Contact Now E-Mail Telephone WhatsApp

Product Details

There are a variety of sizes to choose from, less than 2 layers, more than 4 layers

The counterweight block is bolted to adjust the throwing amount of the vibrating screen

The installation angle of the screen varies from 15° to 20°

Using hack bolt design, higher reliability

Compared with grease screens, oil lubrication can extend bearing life

The spacing between the screen plates is increased to facilitate the replacement of media

You can choose a crown or flat screen plate, depending on the medium

Model	Number of layers	Width × length (mm)	Maximum feed (mm)	Motor power (kW)
SI5162	2	1,600 x 4,900	200	11
SI5163	3	1,600 x 4,900	200	11
SI6162	2	1,890 x 4,900	200	15
SI6163	3	1,890 x 4,900	200	15
SI6202	2	1,890 x 6,115	200	18.5
SI6203	3	1,890 x 6,115	200	18.5
SI6204	3	1,890 x 6,115	200	22
SI7202	2	2,190 x 6,050	200	22
SI7203	3	2,190 x 6,050	200	18.5 x 2
SI8202	2	2,500 x 6,115	200	18.5 x 2
SI8203	3	2,500 x 6,115	200	22 x 2
SI8204	4	2,500 x 6,115	200	22 x 2
SI8242	2	2,500 x 7,320	200	30 x 2
SI8243	3	2,500 x 7,320	200	30 x 2
SI10242	2	3,100 x 7,320	200	37 x 2
SI10243	3	3,100 x 7,320	200	37 x 2
SI12242	2	3,600 x 7,330	200	37 x 2
SI12243	3	3,600 x 7,330	200	37 x 2